Table of contents

Configure Device Control

Configure the Device Control module to define its behavior for a policy.

When designing the module's behavior and implementing it using the API, use the background information and guidance that is provided in About Device Control.

Policy objects contain two objects that you use to configure the Device Control module:

  • DeviceControlPolicyExtension: Controls the module state (on or off), identifies the applied Device Control rules, and identifies the stateful configuration to use with the module.
  • PolicySettings: Policy settings include several Device Control related settings that control the runtime behavior of the module, such as:
    • action of USB Mass Storage and Mobile (MTP/PTP)
    • permission of USB AutoRun Function

Configure Device Control related policy settings, as described in Configure policy and default policy settings.

The following JSON represents the data structure of a DeviceControlPolicyExtension object:

{
    "state": "off",
    "moduleStatus": {...}
}

The moduleStatus property is read-only. It provides the runtime status of the Device Control module. See Report on Computer Status.

General steps

To configure Device Control, use the following general steps:

  1. Create a DeviceControlPolicyExtension object and set the properties.
  2. Create a PolicySettings object to configure runtime settings of the module.
  3. Create a Policy object and add the DeviceControlPolicyExtension and PolicySettings objects.
  4. Use a PoliciesApi object to add or update the policy in Workload Security.

    If you only need to set a single Device Control related policy setting, see Configure a single policy or default policy setting.

Create a DeviceControlPolicyExtension object and set the state and rule IDs:

device_control_policy_extension = api.DeviceControlPolicyExtension()
device_control_policy_extension.state = "on"

Next, create a PolicySettings object to configure Device Control related settings. (For detailed information about policy settings, see Configure policy and default policy settings.) For example, you can block USB mass storage access:

policy_settings = api.PolicySettings()
setting_value = api.SettingValue()
setting_value.value = "Block"
policy_settings.device_control_setting_device_control_usb_storage_device_action = setting_value

At this point, the Device Control policy extension and the policy settings are configured. Next, add them to a Policy object, and use a PoliciesApi object to modify a policy in Workload Security.

policy = api.Policy()
policy.device_control = device_control_policy_extension
policy.policy_settings = policy_settings

policies_api = api.PoliciesApi(api.ApiClient(configuration))
returned_policy = policies_api.modify_policy(policy_id, policy, api_version)

The policy_id (or policyID) parameter of modifyPolicy identifies the actual policy in Workload Security that is to be modified. This policy is modified according to the policy object that is used as the policy parameter. Any properties of the policy parameter that are not set remain unchanged on the actual policy.

Example

The following example creates a Policy object, modifies its DeviceControlPolicyExtension, and configures a policy setting. The policy is then updated in Workload Security.

policies_api = api.PoliciesApi(api.ApiClient(configuration))
policy = api.Policy()
device_control_policy_extension = api.DeviceControlPolicyExtension()

# Turn on Device Control
device_control_policy_extension.state = "on"

# Add the Device Control state to the policy
policy.device_control = device_control_policy_extension

# Create a policy_settings
policy_settings = api.PolicySettings()

# Block USB mass storage access
usb_mass_storage_setting_value = api.SettingValue()
usb_mass_storage_setting_value.value = "Block" # Allow values: Full Access, Read Only, Block
policy_settings.device_control_setting_device_control_usb_storage_device_action = usb_mass_storage_setting_value

# Block USB autorun
usb_autorun_setting_value = api.SettingValue()
usb_autorun_setting_value.value = "Block" # Allow values: Allow, Block
policy_settings.device_control_setting_device_control_auto_run_usb_action = usb_autorun_setting_value

# Block "Mobile (MTP/PTP)" access
mobile_setting_value = api.SettingValue()
mobile_setting_value.value = "Block" # Allow values: Full Access, Read Only, Block
policy_settings.device_control_setting_device_control_mobile_device_action = mobile_setting_value

# Add USB mass storage access to the policy
policy.policy_settings = policy_settings

# Modify the policy on Workload Security
policies_api.modify_policy(policy_id, policy, api_version)

Also see the Modify a Policy operation in the API Reference.

For information about authenticating API calls, see Authenticate with Workload Security.

Create a USB Device Exception

Generally, to create a Device Control excetion rule you perform the following steps:

  1. Create a USBDevice object.
  2. Add the USB device to Workload Security with USBStorageDevicesApi.
  3. Set the USB device to full-access with PolicyDeviceControlExceptionRulesApi to a policy.
# Create a new USB device
device = api.USBDevice()
device.name = 'device name'
device.vendor = 'device vendor'
device.model = 'device model'
device.serial_number = 'device serial number' 

usb_storage_device_api = api.USBStorageDevicesApi(api.ApiClient(configuration))
created_device = usb_storage_device_api.create_usb_device(device, api_version)

# Configure exception list
exception_rules = api.ExceptionRules([])
exception_rule1 = api.ExceptionRule()
exception_rule1.device_id = created_device.id
exception_rule1.action = "full-access"
exception_rules.exception_rules.append(exception_rule1)

# Set the exception list to policy
policy_id = 1
policy_exception_rule_api = api.PolicyDeviceControlExceptionRulesApi(api.ApiClient(configuration))
policy_exception_rule_api.set_exception_rules_on_policy(policy_id, exception_rules, api_version)

Also see Adding items with missing values from ListDeviceInfo reports to Approved Device List.

If you only need to assign an existing USB device to a policy, use the USBStorageDevicesApi.list_usb_devices to get the device_id and set_exception_rules_on_policy directly.